Confirmation Procedure

CHECK DTC PRIORITY
If DTC P1334 is displayed with DTC P0241 or P0242, first perform the trouble diagnosis for DTC P0241 or P0242.

Is applicable DTC detected?

YES>>

Perform diagnosis of applicable. Refer to DTC Description .

NO>>

GO TO 2.
PERFORM COMPONENT FUNCTION CHECK
NOTE: Use component function check to check the overall function of turbocharger system circuit.
1. Turn ignition switch ON and engine stopped.
2. On the CONSULT screen, select "ENGINE">>"ACTIVE TEST">>"WASTEGATE ACTUATOR".
3. Operate "Up" or "Down", set "W/G ACTUATOR POSITION B2" to 0.002 m, and make a quick short note of value "V1" of "W/G ACTUATOR POSI SEN B2".
4. Operate "Up" or "Down", set "W/G ACTUATOR POSITION B2" to 0.006 m, and make a quick short note of value "V2" of "W/G ACTUATOR POSI SEN B2".
Do the values of "V1" and "V2" change (visually, ACTUATOR SHAFT operates) and "V2" minus "V1" becomes equal to or more than 1.3 V?

YES-1>>

To check malfunction symptom before repair: Refer to Inspection .

YES-2>>

Confirmation after repair: INSPECTION END

NO>>

Refer to DTC Diagnosis Procedure .