Component Function Check

1. Disconnect horn relay 2.
2. Perform "VEHICLE SECURITY HORN" in "ACTIVE TEST" mode of "THEFT ALM" of "BCM" using CONSULT.
3. Check the horn operation.

   Test item		Description
   VEHICLE SECURITY HORN	ON	Horn high	Sounds (for 0.5 sec.)

Is the operation normal?

YES>>

GO TO 2.

NO>>

Refer to Diagnosis Procedure .

1. Reconnect horn relay 2.
2. Disconnect horn relay 1.
3. Perform "VEHICLE SECURITY HORN" in "ACTIVE TEST" mode of "THEFT ALM" of "BCM" using CONSULT.
4. Check the horn operation.

   Test item		Description
   VEHICLE SECURITY HORN	ON	Horn low	Sounds (for 0.5 sec.)

Is the operation normal?

YES>>

INSPECTION END

NO>>

Refer to Diagnosis Procedure .