Work Procedure
CAUTION:
When performing the following operations, always use CONSULT : (It cannot be performed by any means other than CONSULT.)
- Replacing ABS actuator and electric unit (control unit)
- CHANGE OF SYSTEM MODE
CONSULT
- Select "ABS", "WORK SUPPORT", and "SYSTEM MODE CHANGE" according to this order.CAUTION:
Never operate the parking brake switch.
- Select "START".
- Check display item "FACTORY MODE".
- Select "ABS", "WORK SUPPORT", and "SYSTEM MODE CHANGE" according to this order.
Is the inspection result "Off"?
YES>>
GO TO 2.
NO>>
Perform change of system mode again.
- PERFORM THE SELF DIAGNOSTIC RESULT
- Pull parking brake switch to activate electric parking brake.
- Push parking brake switch to release electric parking brake.
- Select "Self Diagnostic Result" mode of "ABS".
Is malfunction detected?
YES>>
Check the DTC. Refer to DTC Index .
NO>>
Inspection End