Diagnosis Procedure
- CHECK VCR MOTOR
- Turn ignition switch OFF.
- Disconnect VCR control module harness connector.
- Check the continuity between VCR control module harness connectors.
VCR control module Continuity Terminal 1 2 Existed 14 2 14 Is the inspection result normal?
YES>>
Replace VCR control module. Refer to Removal and Installation
NO>>
GO TO 2.
- CHECK VCR MOTOR CIRCUIT
- Disconnect VCR motor harness connector.
- Check the continuity between VCR control module harness connectors and VCR motor harness connector.
VCR control module VCR motor Continuity Connector Terminal Connector Terminal F90 2 F94 3 Existed 3 2 4 1
Is the inspection result normal?
YES>>
GO TO 3.
NO>>
Repair or replace error-detected parts.
- CHECK VCR MOTOR
Refer to Component Inspection .
Is the inspection result normal?
YES>>
Check intermittent incident. Refer to intermittent incident .
NO>>
Repair or replace malfunctioning parts.