System Description: Notes

The steering operation condition by the driver and the information from multiple sensors are computed by the chassis control module, and a command is transmitted to the ABS actuator and electric unit (control unit).
The ABS actuator and electric unit (control unit) controls the brake based on the command from the chassis control module.
When cornering, driver operation is reduced and vehicle behavior is smoothened.
When the drive mode select switch is set to the "SPORT" mode, the amount of brake control provided by active trace control is reduced.
When the PERSONAL mode is selected, active trace control can be switched ON/OFF through the "Infiniti Drive Mode Selector" on the integral switch.
When the OFF the VDC system, the active trace control system is also completely turned OFF.
When the active trace control function operates, operation display can be checked on the information display in the combination meter. However, when assist control operates to an excessive degree during cornering, this is not displayed.
When a malfunction occurs in active trace control function, the master warning lamp illuminates and the information display in the combination meter informs the driver.

NOTE:

Active trace control function may not be effective in all driving environments (traction conditions, etc.).
When active trace control function operates, vibration may be transmitted to the brake pedal, an operation sound may be heard, and a feeling of deceleration may be felt. These are not symptoms of malfunctions and indicate normal operating conditions.
When the active trace control is selected OFF, some functions will be kept ON to assist driver. (For example, avoidance condition.)