Work Procedure
CAUTION:
When performing the following operations, always use CONSULT: (It cannot be performed by any means other than CONSULT.)
- Replacing ABS actuator and electric unit (control unit)
- CHANGE OF SYSTEM MODE
CONSULT
- Select "ABS", "WORK SUPPORT", and "SYSTEM MODE CHANGE" according to this order.CAUTION: Never operate the parking brake switch.
- Select "START".
- Check display item "FACTORY MODE ".
Is the inspection result "Off"?
YES
GO TO 2.
NO
Perform change of system MODE again.
- Select "ABS", "WORK SUPPORT", and "SYSTEM MODE CHANGE" according to this order.
- PERFORM THE SELF DIAGNOSTIC RESULT
- Pull parking brake switch to activate electric parking brake.
- Push parking brake switch to release electric parking brake.
- Select "Self Diagnostic Result" MODE of "ABS".
Is malfunction detected?
YES
Check the DTC. Refer to DTC Index .
NO
Inspection End