Work Procedure
Vehicle specification needs to be written with CONSULT because it is not written after replacing the ADAS control unit 2.
The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the ADAS control unit 2.
NOTE:
For details the network connection and operation, refer to "CONSULT Operation Manual".
The configuration no need to "save" configuration data from the ADAS control unit 2. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.
CAUTION:
- Complete the procedure of "Configuration" in order.
- If incorrect "Configuration", incidents might occur.
- WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to ADAS control unit 2 following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
NOTE:- Log in the network according to CONSULT guidance.
- For details the network connection and operation, refer to "CONSULT Operation Manual".
WORK END