Wake-up operation

WARNING: This page is about a different car, the 2022 Nissan Rogue Sport. However, it is still accessible from the selected car via links, so may be relevant.

BCM transmits sleep wake up signal (wake up) to each unit when any condition listed below is established, and then goes into normal mode from low power consumption mode.
Each unit starts transmissions with CAN communication by receiving sleep wake up signals.

Wake-up condition

Receiving the sleep-ready signal (Not-ready) from any units
Ignition switch* ¹ : OFF -> ON or START
Key switch* ¹ : OFF -> ON, ON -> OFF
Push-button ignition switch (push switch)* ² : OFF-> ON
Hazard switch: OFF -> ON, ON -> OFF
HI BEAM switch: OFF -> ON, ON -> OFF
PASSING switch: OFF -> ON, ON -> OFF
HEADLAMP switch: OFF -> ON, ON -> OFF
TAIL LAMP switch: OFF -> ON
FR FOG switch: OFF -> ON, ON -> OFF
RR FOG switch: OFF -> ON, ON -> OFF
Driver door switch: OFF -> ON, ON -> OFF
Passenger door switch: OFF -> ON, ON -> OFF
Rear RH door switch: OFF -> ON, ON -> OFF
Rear LH door switch: OFF -> ON, ON -> OFF
Back door switch: OFF -> ON, ON -> OFF
Driver door request switch: OFF -> ON
Passenger door request switch: OFF -> ON
Back door opener switch: OFF -> ON
Back door opener request switch: OFF -> ON
Stop lamp switch: OFF -> ON
Front door lock assembly (driver side) (unlock sensor): OFF -> ON, ON -> OFF
Remote keyless entry receiver communication: Receiving
Door lock and unlock switch: NEUTRAL -> LOCK, NEUTRAL -> UNLOCK

* ¹ : Without Intelligent Key system

* ² : With Intelligent Key system