Sleep mode activation

WARNING: This page is about a different car, the 2022 Nissan Rogue Sport. However, it is still accessible from the selected car via links, so may be relevant.

BCM receives the sleep-ready signal (ready) from IPDM E/R, combination meter and TCU via CAN communication.
BCM transmits the sleep wake up signal (sleep) to each unit when all of the CAN sleep conditions are fulfilled.
Each unit stops the transmission of CAN communication with the sleep wake up signal. BCM is in CAN communication sleep mode.
BCM is in the low power consumption mode and perform the low power consumption control when all of the BCM sleep conditions are fulfilled with CAN sleep condition.

Sleep condition

CAN sleep condition

BCM sleep condition

Receiving the sleep-ready signal (ready) from all units

Ignition switch* ¹ : OFF
Push-button ignition switch (push switch)* ² : No change 2 seconds
Warning chime: Not operation
Intelligent Key warning buzzer* ² : Not operation
Stop lamp switch: OFF
Turn signal indicator lamp: Not operation
Exterior lamp: OFF
Door lock status: No change 2 seconds
Meter display signal: Non-transmission
Door switch status: Finishing door lock/unlock output or finishing delay timer
Back door opener switch status: Finishing back door open output
Rear window defogger: OFF
RAP system: OFF
CONSULT communication status: Not communication

* ¹ : Without Intelligent Key system

* ² : With Intelligent Key system