Work Procedure
- WRITING MODE SELECTION
CONSULT Configuration
Select "Re/programming, Configuration" of "MULTI AV".
When writing saved data
GO TO 2.
When writing manually
GO TO 3.
- WRITING VEHICLE SPECIFICATION
Select "Configuration" or "After Replace ECU", and write the vehicle specification saved in CONSULT to display control unit.
CAUTION: Do not perform any operation such as the navigation operation during configuration writing.GO TO 4.
- WRITE VEHICLE SPECIFICATION
Select "Manual Configuration", and write the setting value as shown in the following table to display control unit according to the vehicle specification.
CAUTION: Grasp vehicle specifications precisely. The control of ECU may not function normally if the specifications are misread.NOTE:- The items shown in this list depend on vehicle specifications.
- The config list may not be displayed depending on vehicle specifications. This is not a malfunction.
- If selection items are not displayed on the CONSULT screen, touch "NEXT".
MANUAL SETTING ITEM
Detail
Items
Setting value
NAVIGATION
WITH
Models with navigation
WITHOUT
Models without navigation
TELEMATICS
WITH
Models with telematics system
WITHOUT
Models without telematics system
DESTINATION
U.S.A.
For United States of America
Canada
For Canada
EUR
For Europe
Russia
For Russia
Mexico
For Mexico
LAM
For Latin America
GCC
For The Middle East
Vietnam
For Vietnam
AUDIO AMP TYPE
4ch AMP
Models with BOSE audio system (13 speakers models)
BosePerformance AMP
Models with BOSE audio system (17 speakers models)
Mobile entertainment system
WITH
Models with rear entertainment system
WITHOUT
Models without rear entertainment system
FEB SYSTEM
OFF
Models without forward emergency brake system
ON
Models with forward emergency brake system
DAB FUNCTION
WITH
Models with DAB function
WITHOUT
Models without DAB function
GO TO 5.
- PERFORM SELF-DIAGNOSIS
Perform self-diagnosis of CONSULT, and check whether or not DTC B1341-55 is detected.
Is DTC B1341-55 detected?
YES
GO TO 3.
NO
GO TO 5.
- OPERATION CHECK
Check that the operation of the display control unit and camera images (fixed guide lines and predictive course lines) are normal.
Work End.