LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2021 >> QX50 Essential, FWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Direct Adaptive Steering >> Basic Inspection >> Steering Wheel >> Inspection >> Rack Sliding Force

Rack Sliding Force

  1. Disconnect lower joint from steering gear assembly. Refer to Removal and Installation .
  2. Disconnect steering outer socket from steering knuckle. Refer to Removal and Installation .
  3. While pulling outer socket slowly in +/-11.5 mm (+/-0.453 in) range from neutral position, make sure rack sliding force is within specification.
    G04082632Courtesy of NISSAN NORTH AMERICA, INC.

    Rack sliding force

    : Refer to Steering Gear and Linkage .
    • If rack sliding force is not within specification, overhaul steering gear assembly.
scientia non olet · About LEMON Manuals