LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2021 >> Q60 Pure, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Diagnostics) (3 Of 4) >> Component Parts/Circuit Diagnosis >> Crankshaft Position Sensor >> Component Inspection

Component Inspection

  1. CHECK CRANKSHAFT POSITION (CKP) SENSOR-I 
    1. Turn ignition switch OFF.
    2. Loosen the fixing bolt of the sensor.
    3. Disconnect CKP sensor harness connector.
    4. Remove the sensor.
    5. Visually check the sensor for chipping.
      G04812272Courtesy of NISSAN NORTH AMERICA, INC.

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    Replace CKP sensor. Refer to DRIVE PLATE : Exploded View .

  2. CHECK CKP SENSOR-II 

    Check the resistance between CKP sensor terminals as per the following.

    CKP sensor

    Condition

    Resistance

    Terminal (Polarity)

    1

    2

    Temperature [ deg.C (deg.F)]

    25 (77)

    Except 0 or INF.Ohm

    3

    2

    3

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace CKP sensor. Refer to DRIVE PLATE : Exploded View .

scientia non olet · About LEMON Manuals