DTC Detection Logic

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P0721

OUTPUT SPEED SENSOR

(Output Shaft Speed Sensor Circuit Range/Performance)

Diagnosis condition

When all of the following conditions are satisfied with different gears:

• At no gear change
• Selector lever: Other than P, R, N
• Vehicle speed: 10 km/h (7 MPH) or more
• Input speed: 300 RPM or more
• Engine speed: "Input speed" -"100 RPM" or more
• 1.5 seconds or more after shift from D to M position
• When any of the following throttle position is established;
  • Driving at D ₁ , D ₂ : 2.0/8 or more
  • Driving at M1, M2: 0.625/8 or more
  • Other than above: 0/8 or more

Signal

Output speed sensor signal

Threshold

TCM judges that output speed sensor signal is not reasonable by comparing input speed sensor 1 signal, input speed sensor 2 signal and output speed sensor signal.

Diagnosis delay time

Satisfy for four times in 1DC according to any of the following;

• ATF temperature is 200 deg. C (392 deg. F) or less: 1 second or more
• ATF temperature is 20 deg. C (68 deg. F) or less: 5 seconds or more
• ATF temperature is -30 deg. C (-22 deg. F) or less: 22 minutes or more