LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2021 >> Q50 Pure, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (6 Of 6) >> Engine (ECM) >> P23EB Intake Camshaft Position Sensor >> Confirmation Procedure >> VR30DDTT engine

VR30DDTT engine

  1. CHECK DTC PRIORITY 

    If DTC P23EB is displayed with the following DTC, perform the confirmation procedure (trouble diagnosis) for the applicable DTC.

    • P0021
    • P34B0
    • P34A8
    • P34A9
    • P34AA
    • P34AB
    • P34B1

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. Refer to DTC Index . (For turbo high pressure model) or Refer to DTC Index . (For turbo low pressure model).

    NO

    GO TO 2.

  2. PRECONDITIONING 

    If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.

    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

    TESTING CONDITION:

    Before performing the following procedure, confirm that battery voltage is more than 11 V when ignition switch ON.

    GO TO 3.

  3. PERFORM DTC CONFIRMATION PROCEDURE 

    SYMBOL With CONSULT

    1. Start the engine and wait at least 5 seconds.
    2. Check DTC.

    Is DTC P23EB detected?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: INSPECTION END