Component Inspection
- CHECK STOP LAMP SWITCH
- Turn the ignition switch OFF.
- Disconnect stop lamp switch harness connector.
- Check the continuity when stop lamp switch is operated.
Stop lamp switch
Condition
Continuity
Terminal
1-2 *1
3-4 *2
When stop lamp switch is released
(When brake pedal is depressed)
Existed
When stop lamp switch is pressed
(When brake pedal is released)
Not existed
*1: Models with forward emergency braking
*2: Models without forward emergency braking
Is the inspection result normal?
YES
INSPECTION END
NO
Replace the stop lamp switch. Refer to BRAKE PEDAL : Removal & Installation .