LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2020 >> QX60 Pure, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Periodic Maintenance >> CVT Fluid >> Level Check >> Notes

Level Check: Notes

  1. Park the vehicle on a level surface with the engine running and parking brake set.
  2. Using CONSULT-III plus, ensure that the CVT fluid temperature is between 170 deg.F to 180 deg.F (77 deg.C to 82 deg.C).
  3. Shift the transmission into REVERSE for 5 seconds.
  4. Shift the transmission into DRIVE for 5 seconds.
  5. Shift the transmission into REVERSE for 5 seconds.
  6. Shift the transmission into PARK.
  7. Remove cap (A) using Tool.
    GNSALDIA0432Z-432Courtesy of NISSAN NORTH AMERICA, INC.

    Tool number

    : (J-52611)
  8. With the vehicle in PARK and the engine running, insert Tool into the CVT fluid pipe.

    Tool

    : (J-51155)
    NOTE: The handle on the Tool has two positions, verify Tool is in red position (B) and not blue position (A).
    GNSALDIA0434Z-434Courtesy of NISSAN NORTH AMERICA, INC.
  9. Inspect Tool to determine the CVT fluid level.
    GNSDB113703Courtesy of NISSAN NORTH AMERICA, INC.

    Tool

    : (J-51155)

    CVT fluid level

    : 14 - 22 mm (0.55 - 0.86 in)
scientia non olet · About LEMON Manuals