Work Procedure

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

SAVING VEHICLE SPECIFICATION
WITH CONSULT

Perform "READ CONFIGURATION" to save or print current vehicle specification.

Is vehicle specification saved normally?

YES

GO TO 2.

NO

GO TO 4.
REPLACE LANE CAMERA UNIT
Replace lane camera unit. Refer to Removal and Installation .

GO TO 3.
WRITING VEHICLE SPECIFICATION
WITH CONSULT

Perform "WRITE CONFIGURATION - Config file" to write vehicle specification.

GO TO 6.
REPLACE LANE CAMERA UNIT
Replace lane camera unit. Refer to Removal and Installation .

GO TO 5.
WRITING VEHICLE SPECIFICATION
WITH CONSULT
1. Select "WRITE CONFIGURATION - Manual selection"
2. Touch "Next".
3. Touch "OK".
4. Check that the configuration has been successfully written and touch "End".
GO TO 6.
OPERATION CHECK
Confirm that following functions operate normally.
- LDW/LDP: Description
WORK END