Work Procedure

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

LANE CAMERA UNIT CONFIGURATION
Perform the lane camera unit configuration with CONSULT. Refer to Description .

GO TO 2.
CAMERA AIMING ADJUSTMENT
Perform the camera aiming adjustment with CONSULT. Refer to Description .

GO TO 3.
PERFORM SELF-DIAGNOSIS
Perform the self-diagnosis of lane camera unit with CONSULT. Check if any DTC is detected.

Is any DTC detected?

YES

Perform the trouble diagnosis for the detected DTC. Refer to DTC Index .

NO

GO TO 4.
LDW/LDP SYSTEM ACTION TEST
1. Perform the LDW/LDP system action test. Refer to Description .
2. Check that the LDW/LDP system operates normally.
GO TO 5.
BLIND SPOT WARNING/BLIND SPOT INTERVENTION ACTION TEST
1. Perform the Blind Spot Warning/Blind Spot Intervention system action test. Refer to Description .
2. Check that the Blind Spot Warning/Blind Spot Intervention system operates normally.
WORK END