VR30DDTT engine

1. Turn ignition switch OFF.
2. Disconnect EOP sensor harness connector.
3. Check resistance between EOP sensor connector terminals.

   EOP sensor		Condition	Resistance (kOhm)
   +	-
   Terminal
   1	2	None	4 kOhm- 10 kOhm
   	3		2 kOhm- 8 kOhm
   2	1		4 kOhm- 10 kOhm
   	3		1 kOhm- 3 kOhm
   3	1		2 kOhm- 8 kOhm
   	2		1 kOhm- 3 kOhm

Is the inspection result normal?

YES

INSPECTION END.

NO

Replace EOP sensor. Refer to TIMING CHAIN : Exploded View .