LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2019 >> QX80 Luxe, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 207 (Engine Control System (DTCS) (1 Of 13)) >> Engine (ECM) >> DTC P0016: Intake Valve Timing Control >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2020 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If DTC P0016 is displayed with DTC P0075, first perform the trouble diagnosis for DTC P0075. Refer to DTC Description .

DTC No.

Trouble diagnosis

(Trouble diagnosis content)

Detecting condition

Possible cause

P0016

Crankshaft position B1 sensor A

(Crankshaft position - camshaft position correlation bank 1 sensor A)

During the diagnosis of alignment of intake valve timing control, the angle difference between actual angle and target angle is 13 degrees or more.

  • Crankshaft position sensor
  • Camshaft position sensor
  • Intake valve timing control solenoid valve
  • Accumulation of debris to the signal pick-up portion of the camshaft
  • Timing chain installation
  • Foreign matter caught in the oil groove for intake valve timing control