Precaution for Automatic Brake Hold

Do not disassemble chassis control module.
Do not use any parts that have been dropped.
Do not perform active test during driving.
Do not operate automatic brake hold on a steep slope or a slippery road. (The vehicle may move even when automatic brake hold is applied.)
When the stopped condition of the vehicle cannot be maintained by automatic brake hold, depress brake pedal to maintain the stopped condition.
Master warning lamp (yellow) illuminates if a malfunction occurs in automatic brake hold system. A pop-up screen also appears on information display of combination meter. Refer to Chassis Control Warning .
When the vehicle is moved or may start moving while automatic brake hold is being applied, master warning lamp (red) illuminates, and a warning chime sounds at the same time. A pop-up screen also appears on information display of combination meter. Refer to Chassis Control Warning (Automatic Brake Hold) .
When the vehicle is to be moved by towing, car washing machine, or other means, turn OFF automatic brake hold.
When parking the vehicle, shifting the selector lever to P range (CVT models) and apply parking brake.
When getting on the vehicle or when loading/unloading a cargo, shifting the selector lever to P range (CVT models) and apply parking brake.
When VDC warning lamp or brake system warning lamp (yellow) is illuminated, automatic brake hold does not operate.
The automatic brake hold function resets to OFF every time the key is switched from on to off.
While automatic brake hold is being applied, the system may apply the brakes to maintain the stopped condition of the vehicle. At this time, a operating noise may be generated. These are not symptoms of malfunctions and indicate normal operating conditions.
If the switch indicator does not illuminate after operating automatic brake hold switch, inspect brake control system and parking brake system in addition to automatic brake hold system.