Diagnosis Procedure

1. Turn ignition switch ON.
2. Check DTC using CONSULT.

What is the display history of DTC "B210B-00"?

"PAST"

GO TO 2.

"CRNT"

GO TO 3.

1. Select "Self Diagnostic Result" mode of "Steering column cont module" using CONSULT.
2. Erase DTC, and then repeat "DTC CONFIRMATION PROCEDURE". Refer to DTC Description .

Is DTC "B210B-00" detected?

YES

GO TO 3.

NO

Check intermittent incident. Refer to Intermittent Incident .

1. Turn ignition switch OFF.
2. Check battery voltage is more than 9 V and less than 16 V.

Is the inspection result normal?

YES

GO TO 4.

NO

Perform battery inspection. Refer to Work Procedure .

Perform alternator diagnosis and repair work flow. Refer to Work Flow (With EXP-800 NI or GR8-1200 NI) or Work Flow (Without EXP-800 NI or GR8-1200 NI) .

Is the inspection result normal?

YES

Replace steering column control module. Refer to Removal and Installation .

NO

Repair as needed.