LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2019 >> Q70L 5.6 Luxe, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution System >> Removal And Installation >> Push-Button Ignition Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove front body side welt. Refer to Removal and Installation .
  2. Remove instrument side finisher LH. Refer to Removal and Installation .
  3. Remove instrument lower panel LH. Refer to Removal and Installation .
  4. Disconnect NATS antenna amp. connector and push-button ignition switch connector.
  5. Disengage the NATS antenna amp. fixing pawls while pushing NATS antenna amp. from its back side, so that NATS antenna amp. and push-button ignition switch are lifted up from instrument panel assembly.
    GNSJMKIA8262Z-262Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL

    : Pawl
  6. While pushing the push-button ignition switch from its back side, disengage the push-button ignition switch fixing pawls using a minus driver etc., and then remove push-button ignition switch.
    GNSJMKIA8263Z-263Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL

    : Pawl
scientia non olet · About LEMON Manuals