Exploded View: Disassembly

1.

Low pressure piping

2.

Rear cover cap

3.

Gear-sub assembly

4.

Power steering solenoid valve

5.

O-ring

6.

Adjusting screw

7.

Spring

8.

Retainer

9.

Outer socket

10.

Boot clamp

11.

Boot

12.

Inner socket

13.

Boot clamp (stainless wire)

14.

Spacer

15.

Copper washer

16.

Cylinder tubes

17.

Gear housing assembly

18.

Rack oil seal

19.

Rack assembly

20.

Rack Teflon ring

21.

End cover assembly

: Always replace after every disassembly.

:N.m (kg-m, ft-lb)

: Apply power steering fluid.

: Apply Genuine High Performance Thread Sealant or equivalent. Refer to Recommended Chemical Products and Sealants

: Apply Genuine High Strength Thread Locking Sealant or equivalent. Refer to Recommended Chemical Products and Sealants .

: Apply multi-purpose grease.