LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2019 >> Q70 3.7 Luxe, AWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Basic Inspection >> Steering Wheel >> Inspection >> Rack Sliding Force

Rack Sliding Force

  1. Disconnect lower joint and steering knuckle from steering gear assembly. Refer to Removal and Installation  (2WD), Removal and Installation  (AWD).
  2. Start and run the engine at idle to make sure steering fluid has reached normal operating temperature.

    Fluid temperature

    : 50 - 80 deg.C (122 - 176 deg.F)
  3. While pulling outer socket slowly in +/-11.5 mm (+/-0.453 in) range from neutral position, make sure rack sliding force is within specification.
    G04082632Courtesy of NISSAN NORTH AMERICA, INC.

    Rack sliding force

    : Refer to Rack Sliding Force .
  4. If rack sliding force is not within specification, overhaul steering gear assembly.
scientia non olet · About LEMON Manuals