Lane Camera Unit Handling
To keep the proper operation of Active Lane Control and prevent a system malfunction, be sure to observe the following:
- Always keep the windshield clean.
- Do not attach a sticker (including transparent material) or install an accessory near the lane camera unit.
- Do not place reflective materials, such as white paper or a mirror, on the instrument panel. The reflection of sunlight may adversely affect the lane camera unit capability of detecting the lane markers.
- Do not strike or damage the areas around the lane camera unit.
- Do not touch the camera lens.
- Do not remove the screw located on the lane camera unit.
NOTE:
For operating the system normally, replace the windshield glass in the following case.
- When there is a scratch on the area printed in black of windshield upper portion.
- When there is a scratch on the detecting range of lane camera unit. (the area within the lines extended from the notch of the area printed in black)
|
|
Area printed in black |
|
|
Line extended from the notch of the area printed in black |
|
|
Detail |
|
|
The detecting range of lane camera unit |