Panic Alarm
- The panic alarm function activates horns and headlamps intermittently when the owner presses the PANIC ALARM button of Intelligent Key outside the vehicle while the ignition switch is OFF.
- In the same way as the Intelligent Key, the panic alarm can be activated and stopped by operating a cellular phone using the Telematics system function. For details, refer to System Description .
- When BCM receives panic alarm signal from Intelligent Key or TCU, BCM transmits "Theft Warning Horn Request" signal and "High Beam Request" signal intermittently to IPDM E/R via CAN communication. To prevent the activation due to mis-operation of Intelligent Key by owner, the panic alarm function is activated when BCM receives the signal for 0.4 - 0.6 seconds.
- Panic alarm operation is maintained for 25 seconds.
- Panic alarm operation is cancelled when BCM receives one of the following signals.
- LOCK button of Intelligent Key: ON
- UNLOCK button of Intelligent Key: ON
- TRUNK OPEN button of Intelligent Key: ON
- PANIC ALARM button of Intelligent Key: Long pressed
- Any door request switch: ON
- Hold the outside handle grip (one touch unlock sensor: ON)
- When BCM receive panic alarm signal from TCU via CAN communication.