Configuration (ADAS Control Unit 2): Description

Since vehicle specifications are not included in the ADAS control unit 2 after replacement, it is required to write vehicle specifications with CONSULT. Refer to Work Procedure .

Configuration has three functions as follows.

Function		Description
Read/Write Configuration	Before Replace ECU	Allows the reading of vehicle specification written in ADAS control unit 2 to store the specification in CONSULT.
	After Replace ECU	Allows the writing of the vehicle information stored in CONSULT into the ADAS control unit 2.
Manual Configuration		Allows the writing of the vehicle specification into the ADAS control unit 2 by hand.