LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2019 >> Q50 Pure, AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> SRS Airbag Control System >> Basic Inspection >> Inspection And Adjustment >> Zero Point Reset >> Description

Zero Point Reset: Description

Zero point reset is an initializing procedure for occupant detection sensor that must be performed when replacing or removing and installing passenger seat.

If zero point reset is not performed, the initialization is incomplete and Occupant Detection System does not operate normally. Refer to Special Repair Requirement .

NOTE:
  • When replacing passenger seat with a NISSAN genuine part, air bag warning lamp turns ON if zero point reset is incomplete.
  • When zero point reset is performed once after removal and installation of passenger seat, CONSULT displays "complete" and air bag warning does not ON.
  • When reinstalling passenger seat after removal, the initial value for occupant detection sensor changes, and Occupant Detection System does not operate normally.
  • Always perform ZERO POINT RESET  after performing the work as per the following.
    • Reinstallation of passenger seat
    • Replacement of passenger seat with a seat that is zero point reset complete.
scientia non olet · About LEMON Manuals