System Description: Description

When ignition switch is OFF, and door unlock operation is performed using Intelligent Key or driver side door request switch or one touch unlock sensor, driver seat automatically adjusts to a driving position other than seat sliding. Seat sliding and steering column tilt perform return operation and are set to standby status.
In standby status, when ignition switch is operated from OFF to ACC, return operation sets seat sliding and steering column tilt to a registered position.

NOTE: When starter signal turns ON during return operation, the operation is interrupted, starter signal turns from ON to OFF, and operation restarts.

Operation Procedure

Unlock driver door by Intelligent Key or driver side door request switch or one touch unlock sensor.
The system performs memory operation.

Operation Condition

Satisfy all of the following items. The Intelligent Key interlock function is not performed if these items are not satisfied.

Item	Request status
Ignition position	OFF
Log-in function setting registration	Registered
Switch inputs Power seat switch Tilt & telescopic switch Door mirror control switch Set switch Memory switch	OFF (Not operated)
A/T shift selector	P position
Seatback	Folded up
CONSULT	Not connected

Detail Flow

Order

Input

Output

Control unit condition

Door unlock signal (CAN)
Key ID signal (CAN)

When the following function is performed, the driver seat control unit transmits the unlock signal from BCM via CAN communication and receives the Key ID signal.

Unlock door: Intelligent Key
Unlock door: Door request switch (driver side)
Unlock door: One touch unlock sensor

Driver seat control unit performs the memory function.