Initialization Procedure
- CHOOSE METHOD
There are two initialization methods.
Which method do you use?
With door switch
GO TO 2.
With vehicle speed
GO TO 3.
- WITH DOOR SWITCH
- Turn ignition switch from ACC to OFF position.
- Driver door switch is ON (open) -> OFF (close) -> ON (open).
GO TO 4.
- WITH VEHICLE SPEED
Drive the vehicle at more than 25 km/h (16 MPH).
GO TO 4.
- STEP-4 (SLIDE THE SEAT TO THE FRONT EDGE BY POWER WALK-IN FUNCTION)
Active power walk-in function and let the seat be slid to the front edge.
NOTE:- STEP-4 is the initialization procedure for power walk-in function.
- If the seat position is already at the front edge, slide the seat backward once and then active power walk-in function.
END