LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> QX80 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Body Control System (Diagnostics)) >> Basic Inspection >> Body Control System >> Configuration (BCM) >> Work Item List

Work Item List

WARNING: This page is about a different car, the 2020 Infiniti QX80. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Thoroughly read and understand the vehicle specification. ECU control may not operate normally if the setting is not correct.
  • The "setting value" of this vehicle is as follows: Never select any other value than the setting value shown below. (If there is only 1 item in "setting value" that means that item is the only choice for this certain vehicle.)

SETTING ITEM

NOTE

Items

Setting value

CAN CONNECTION UNIT

MODE37 <=> MODE41

  • MODE37: Without telematics system
  • MODE41: With telematics system

A/LIGHT LOGIC

MODE2 <=> MODE4

  • MODE2: For Canada
  • MODE4: Except for Canada

<=>: Items which confirm vehicle specifications