Condition For Turn On The Warning Lamp

4WD Warning Lamp 

• Turns ON when there is a malfunction in 4WD system. 4WD warning lamp indicates the vehicle is in fail-safe mode.
• Also turns ON when ignition switch is turned ON, for the purpose of lamp check. Turns OFF approximately for 1 second after the engine starts if system is normal.

  Condition	4WD warning lamp
  Lamp check	Turns ON when ignition switch is turned ON. Turns OFF approx. 1 second after the engine start.
  4WD system malfunction	ON
  Protection function is activated due to heavy load to transfer assembly. (4WD system is not malfunctioning.)	Quick blinking: 2 times/second (Blinking in approx. 1 minute and then turning OFF)
  Large difference in diameter of front/rear tires	Slow blinking: 1 time/2 seconds (Continuing to blink until turning ignition switch OFF)
  Other than above (system normal)	OFF

ATP Warning Lamp 

When the A/T shift selector is in P position, the vehicle may move if the transfer case in neutral. ATP warning lamp is turned on to indicate this condition to the driver.