LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> QX80 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Brake Control System) >> Removal And Installation >> Yaw Rate/Side/DECEL G Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Never drop or strike yaw rate/side/decel G sensor, because it has little endurance to impact. Never use a pneumatic tool.
  1. Remove console finisher assembly. Refer to Removal and Installation .
  2. Disconnect yaw rate/side/decel G sensor harness connector.
  3. Remove yaw rate/side/decel G sensor.
scientia non olet · About LEMON Manuals