LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> QX80 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2556: Push-Button Ignition Switch >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Press push-button ignition switch under the following condition.
      • Brake pedal: Not depressed
    2. Release push-button ignition switch and wait 100 seconds or more.
    3. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.

    Is DTC detected?

    YES

    Go to Diagnosis Procedure .

    NO

    INSPECTION END

scientia non olet · About LEMON Manuals