LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> QX80 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics) (2 Of 2) >> Component/Circuit Diagnosis >> EOP Sensor >> Component Inspection

Component Inspection

  1. CHECK EOP SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect EOP sensor harness connector.
    3. Check resistance between EOP sensor connector terminals.

      +

      -

      Condition

      Resistance (k Ohms)

      EOP sensor

      Terminal

      1

      2

      None

      4 k Ohms- 10 k Ohms

      3

      2 k Ohms- 8 k Ohms

      2

      1

      4 k Ohms- 10 k Ohms

      3

      1 k Ohms- 3 k Ohms

      3

      1

      2 k Ohms- 8 k Ohms

      2

      1 k Ohms- 3 k Ohms

    Is the inspection result normal?

    YES

    INSPECTION END.

    NO

    Replace EOP sensor. Refer to Exploded View .

scientia non olet · About LEMON Manuals