LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> QX30 Premium, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Active Lane Control) >> Active Lane Control >> System Description >> System >> System Description >> Operation And Cancellation Condition

Operation And Cancellation Condition

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

Item

Operating condition

(When all of the following conditions are satisfied)

Cancellation condition

(When any of the following conditions is satisfied)

LDP system setting

ON

OFF

Active Lane Control setting

ON

OFF

Vehicle speed

Approx. 70 km/h (45 MPH) or more

Less than approx. 70 km/h (45 MPH)

Direct Adaptive Steering

The control is admitted.

The control is prohibited.

Lane marker detection

  • Both side lane markers are being detected.
  • Driving in lane

Both side lane markers are lost.

Road curvature

Approx. R200 m (656 ft) or more

Less than approx. R200 m (656 ft)

VDC, EBD, ABS

Not operating

Operating

Lane camera temperature

Normal

High

VDC OFF switch

OFF

ON

Turn signal

After 2 seconds or more from turned OFF

Turned ON

NOTE:
  • The effort of Active Lane Control gradually functions on approximately 80 km/h (50 MPH) from approximately 70 km/h (45 MPH).
  • When all of the above conditions are satisfied after cancellation again, the system will resume operation automatically.
  • Active Lane Control may not function properly, depending on the situation. Refer to Precautions for Active Lane Control .