System Description: Description

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

Automatic drive positioner system is a system that adjusts the driver seat, steering column, and door mirrors.

By using the following functions, an optimum driving position can be achieved. If another driver is seated in the driver seat, the driving position can be easily changed to the preset driving position.

Function		Description
Manual function		The driving position (seat, steering column and door mirror position) can be adjusted by using the power seat switch, tilt & telescopic switch or door mirror remote control switch. For details on Manual function, refer to System Description .
Memory function		The seat, steering column and door mirror move to the stored driving position by pressing seat memory switch (1 or 2). The seat position set with the seat memory switch cannot be operated interlocked with the Intelligent Key. For details on Memory function, refer to System Description .
Entry/Exit assist function	Exit	On exit, the seat moves backward and the steering column moves upward. For details on Exit assist function, refer to System Description .
	Entry	On entry, the seat and steering column returns from exiting position to the previous driving position. For details on Entry assist function, refer to System Description .
Log-in function		The driving position can be registered and retrieved for each Intelligent Key interlocked with the Log-in function of on board personal. For Log-in function description, System Description . For driving position operation with Log-in function, refer to System Description .
Intelligent Key interlock function		When Intelligent Key interlock function performs the following function, it causes the exit assist function to operate. Unlock door: Intelligent Key Unlock door: front door request switch (driver side) Unlock door: one touch unlock sensor Registered information of the driving position is retrieved from the memory registered to the driver seat control unit by the Login-function. For details on Intelligent Key interlock function, refer to System Description .

NOTE: The lumbar support system and side support system are controlled independently with no link to the automatic drive positioner system.

Refer to System Description , System Description .

Sleep control

Driver seat control unit equips sleep control for reducing power consumption.

The system switches to sleep control when all of the following conditions are satisfied.

Ignition switch is OFF.
All devices of auto driving position system are not operating.
Set switch and memory switch (1 and 2) are OFF.

Wake-up control

Sleep control releases when detecting status change in either of the following item.

CAN communication
Power seat switch
Set switch and seat memory switch (1 and 2)
Tilt & telescopic switch