Additional Service When Removing Battery Negative Terminal: Description

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

Entry/exit assist function is reset to the following condition when the battery terminal is disconnected. For details, refer to Work Procedure .

Function	Condition	Procedure
Entry/exit assist	ON	Perform initialization
Entry/exit assist	ON	Set slide amount ^*1

^*1 : Default value is 40mm.

NOTE: Notice that disconnecting the battery when detected DTC are present will erase the DTC memory.