LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> QX30 Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Removal And Installation) >> Unit Disassembly And Assembly >> Input Shaft >> Disassembly and Assembly >> Assembly

Disassembly and Assembly: Assembly

  1. Using sleeve [SST: KV325H0700 (TechMate No. -)(DAIMLER tool No. 168 589 01 14 00)] install the 3rd gear from drive shaft.
  2. Using suitable tool install the sensor rotor from drive shaft.
    CAUTION: Never reuse sensor rotor.
  3. Install 5th and 7th gear from drive shaft.
  4. Install needle bearings.
scientia non olet · About LEMON Manuals