Detail Flow

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

Seat

Order

Input

Output

Control unit condition

Power seat switch

(sliding, lifting, reclining)

The power seat switch signal is inputted to the driver seat control unit when the power seat switch is operated.

Motors

(sliding, lifting, reclining)

The driver seat control unit outputs signals to each motor according to the power seat switch input signal.

NOTE: The power seat can be operated manually regardless of the ignition switch position.

Tilt & Telescopic

Order

Input

Output

Control unit condition

Tilt & telescopic switch

The tilt & telescopic switch signal is inputted to the automatic drive positioner control unit when the tilt & telescopic switch is operated.

Motors

(Tilt, telescopic)

The automatic drive positioner control unit actuates each motor according to the operation of the tilt & telescopic switch.

NOTE: The tilt & telescopic can be operated. when ignition switch is in either ACC or ON position.

Door Mirror

Order

Input

Output

Control unit condition

Door mirror remote

control switch

The door mirror remote control switch signal is inputted to the automatic drive positioner control unit when the door mirror remote control switch is operated.

Motors

(Door mirror motor)

The automatic drive positioner control unit actuates each motor according to the operation of the door mirror remote control switch.

NOTE: The door mirrors can be operated manually when ignition switch is in either ACC or ON position.