Additional Service When Replacing Control Unit: Description

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

Each function is reset to the following condition when the driver seat control unit is replaced. For details, refer to Work Procedure .

Function	Condition	Procedure
Memory (Seat, steering, mirror)	Erased	Perform storing
Entry/exit assist	ON	Perform initialization
Entry/exit assist	ON	Set slide amount ^*1
Log-in	Erased	Perform initialization
Log-in	Erased	Perform storing

^*1 : Default value is 40mm.

NOTE: Notice that disconnecting the battery when detected DTC are present will erase the DTC memory.