LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> QX30 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Body Control System) >> Symptom Diagnosis >> Combination Switch System Symptoms >> Symptom Table

Symptom Table

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform "Data Monitor" of CONSULT to check for any malfunctioning item.
  2. Check the malfunction combinations.

    Malfunction item: x

    Data monitor item

    Malfunction combination

    FR WIPER HI

    FR WIPER LOW

    FR WASHER SW

    FR WIPER INT

    INT VOLUME

    TURN SIGNAL R

    TURN SIGNAL L

    TAIL LAMP SW

    HI BEAM SW

    HEAD LAMP SW 1

    HEAD LAMP SW 2

    PASSING SW

    AUTO LIGHT SW

    FR FOG SW

    x

    x

    x

    x

    A

    x

    x

    x

    x

    B

    x

    x

    x

    C

    x

    x

    x

    D

    x

    x

    E

    x

    x

    F

    x

    x

    G

    x

    x

    x

    H

    x

    x

    x

    x

    I

    x

    x

    x

    x

    J

    All Items

    K

    If only one item is detected or the item is not applicable to the combinations A to K

    L

    All Items are normal

    M
  3. Identify the malfunctioning part from the agreed combination and repair or replace the part.

    Malfunction combination

    Malfunctioning part

    Repair or replace

    A

    Combination switch INPUT 1 circuit

    Inspect the combination switch output circuit applicable to the malfunctioning part. Refer to Diagnosis Procedure .

    B

    Combination switch INPUT 2 circuit

    C

    Combination switch INPUT 3 circuit

    D

    Combination switch INPUT 4 circuit

    E

    Combination switch INPUT 5 circuit

    F

    Combination switch OUTPUT 1 circuit

    Inspect the combination switch input circuit applicable to the malfunctioning part. Refer to Diagnosis Procedure .

    G

    Combination switch OUTPUT 2 circuit

    H

    Combination switch OUTPUT 3 circuit

    I

    Combination switch OUTPUT 4 circuit

    J

    Combination switch OUTPUT 5 circuit

    K

    BCM

    Replace BCM. Refer to Removal and Installation .

    L

    Combination switch

    Replace combination switch. Refer to Removal and Installation .

    M

    Connector and harness

    Check intermittent incident. Refer to Intermittent Incident .
scientia non olet · About LEMON Manuals