Work Procedure
WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to Description .
NOTE: If "READ CONFIGURATION" cannot be used, use the "WRITE CONFIGURATION - Manual selection" after replacing high beam assist control module.GO TO 2.
- REPLACE HIGH BEAM ASSIST CONTROL MODULE
Replace inside mirror assembly (high beam assist control module). Refer to Removal and Installation .
GO TO 3.
- WRITING VEHICLE SPECIFICATION
Perform "WRITE CONFIGURATION" to write vehicle specification. Refer to Description .
WORK END