Work Procedure

With CONSULT

1. Select "Active test" of the "METER/M&A."
2. Perform "Confirmation of genaral maintenance" according to CONSULT guidance.

Without CONSULT

1. Close the hood.
2. Close the all doors.
3. Turn the ignition switch ACC.
4. Select "Trip" menu.
5. Keep pressing the switch and OK switch for 3 seconds or more.

   Courtesy of NISSAN NORTH AMERICA, INC.

6. Select "MAINTENANCE">>"Full service">>"Conf. full serv."
7. Select oil grade of used engine oil.
8. Select "Confirm."
   NOTE: If the service is not performed or only partly performed after resetting the maintenance computer has to be reset to the default value again.

   Perform "Reset general maintenance" of "Active test" using CONSULT. Refer to CONSULT Function .

WORK END