Work Procedure

REPLACE COMBINATION METER
Replace combination meter. Refer to Removal and Installation .

GO TO 2.
WRITING VEHICLE SPECIFICATION
CONSULT Configuration

Perform "Read / Write Configuration". Refer to Description .

GO TO 3.
PERFORM RE LEARNING
With CONSULT

Perform "Re learning". Refer to Description .

GO TO 4.
CHECK ALL ECU SELF-DIAGNOSIS RESULTS
1. Erase all ECU self-diagnosis results using CONSULT.
2. Turn the ignition switch OFF.
3. Turn the ignition switch ON and wait for 2 seconds or more.
4. Check that all ECU self-diagnosis results have no DTC of CAN communication.
WORK END