LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q60 Pure, AWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System - Direct Adaptive Steering (Introduction And Basic Inspection) >> Direct Adaptive Steering >> Basic Inspection >> Additional Service When Removing 12V Battery Negative Terminal >> Work Procedure

Work Procedure

  1. DIRECT ADAPTIVE STEERING INITIALIZE 
    1. Set the steering wheel to the straight-ahead position.
    2. Connect battery terminal.
    3. Start the engine.
      CAUTION: Never drive the vehicle.
    4. Turn the steering wheel from full left stop to full right stop.
    5. Confirm the condition of turning the steering wheel is normal.

    WORK END

scientia non olet · About LEMON Manuals