DTC Description
NOTE:
During engine start, the DTC "C13EB-00" may be detected due to temporary low voltage.
DTC DETECTION LOGIC
|
DTC |
Display item (Trouble diagnosis content) |
Malfunction detected condition |
|
C13EB-00 |
BOOTING ANGLE PROCESSING (Booting angle processing) |
The malfunction of processing to acquire angle information is detected when control module is starting. |
POSSIBLE CAUSE
- The malfunction of processing information
Fail-Safe
- Mode 2NOTE: For fail-safe mode, refer to Fail-safe .
- PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
GO TO 2.
- DTC REPRODUCTION PROCEDURE
With CONSULT
- Start the engine.CAUTION: Never drive the vehicle.
- Perform self-diagnosis for "DAST 1".
Is DTC "C13EB-00" detected?
YES
Proceed to diagnosis procedure. Refer to Diagnosis Procedure .
NO
INSPECTION END
- Start the engine.
DTC CONFIRMATION PROCEDURE