Diagnosis Procedure
- PERFORM SELF-DIAGNOSIS
With CONSULT
- Turn the ignition switch ON.
- Erase self-diagnosis for "DAST 2".
- Turn the ignition switch OFF and wait for at least 10 seconds.
- Start the engine.CAUTION: Never drive the vehicle.
- Perform self-diagnosis for "DAST 2".
Is DTC "C13D2-00" detected?
YES
Replace steering angle sub control module. Refer to Removal and Installation .
NO
- Check enlarged contact spring of terminal. Refer to How to Check Terminal .
- Perform intermittent incident while turning steering wheel. Refer to Intermittent Incident .