DTC Description
DTC DETECTION LOGIC
|
DTC |
Display item (Trouble diagnosis content) |
Malfunction detected condition |
|
C13CF-00 |
ALC FUNCTION REQUEST SIGNAL (Active lane control function request signal) |
Malfunction is detected in Active lane control signal A that is output from chassis control module for 2 seconds or more. |
POSSIBLE CAUSE
- Harness or connector (Chassis communication line)
- Steering angle main control module
- Chassis control module
DTC CONFIRMATION PROCEDURE
- PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
GO TO 2.
- DTC REPRODUCTION PROCEDURE
With CONSULT
- Turn the ignition switch ON.
- Perform self-diagnosis for "DAST 1".
Is DTC "C13CF-00" detected?
YES
Proceed to diagnosis procedure. Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: INSPECTION END